Play Video

Blastroom Dura-Door Rubber Roll Up Door

Space saving, noise dampening. Designed and built tough specially for blasting

Reduce Space and Noise

To ensure dust does not leak from the door into surrounding work areas, the sides of the door are fitted with specially formed steel channels to provide tight sealing. The bottom of the door is fitted with C channel beam and Linatex rubber seal. The seal can be shaped to seal against above ground rails.

Tight Seals Ensure No Dust Leakage

To ensure dust does not leak from the door into surrounding work areas, the sides of the door are fitted with specially formed steel channels to provide tight sealing. On larger doors potential operator injury from a falling door is eliminated by the inclusion of an automatic physical stop system. The Dura-Door rubber roll up door is available with all new Blastechnik blast rooms and as a modernization upgrade to existing blast rooms.

Safety and Maintenance

Dura-Doors are designed to prevent accidental collapse or falling. Even a torn rubber apron will not cause the door to fall. To prevent damage to the door or workpieces the operator must physically hold the up/down button in position. As soon as the button is released the door stops.


The NORD drive is fitted with manual brake release and winding shaft/nut. This will allow the door to be opened or closed in case of electrical failure.

Blastroom Dura-Door Components

Rotary Limit

Open and closed position of the door is controlled by rotary limit switch mounted to the door drive. Mounting position prevents limit switch damage.

Powder Coating

Main frame, panels and all components are powder coated to provide a tough durable finish that will last for years without corrosion.

Controls

Door control buttons are mounted to the main electrical control panel. Satellite up/down buttons are mounted at door location. Switch must be held in for door to operate as a safety precaution.

Side Guides

Formed side guides track the door up and down and provide dust free sealing during blasting.

Custom Seal

For blastrooms with rails, or other obstructions, at door/floor intersection purpose built seals can accommodate the sealing.

Laminated Rubber

Doors are fabricated from a tough SBR laminated rubber. Doors are made to prevent tearing and in the event of damage will not fall or collapse.

More Information on Dura-Doors Here:

Previous Projects

Dura-Door Project by Blastechnik